Sat 19 Nov 2005
Wings for the Moth
Posted by Rob under TM400
No Comments
Continuing work on my Tiger Moth I’ve assembled the ailerons on the lower wing.
These are the assembled control rods.
Here’s the ailerons after cutting them free from the wing. I need to be use more care to cut them straight on the next one.
Paper hinges hold the ailerons to the wing. These were a little awkward to install. You have to line up the three hinges and the control rod. I should have used a jig to cut the slots for the paper hinges. I got some of them crooked and one hinge was a little bent when installed.
And here’s the finished wing.
